1. a State Key Laboratory of Powder Metallurgy School of Materials Science and Engineering Central South University
2. b School of Engineering and Materials Science Queen Mary University of London
网络首发:2022-07-14,
纸质出版:2022
Scan QR Code
Zengkai Jiao, Huiyuan Kang, Bo Zhou, 等. Research progress of diamond/aluminum composite interface design[J]. Functional Diamond, 2022,2(1):25-39.
Zengkai Jiao, Huiyuan Kang, Bo Zhou, et al. Research progress of diamond/aluminum composite interface design[J]. Functional Diamond2022, 2(1): 25-39.
Zengkai Jiao, Huiyuan Kang, Bo Zhou, 等. Research progress of diamond/aluminum composite interface design[J]. Functional Diamond, 2022,2(1):25-39. DOI: 10.1080/26941112.2022.2050953.
Zengkai Jiao, Huiyuan Kang, Bo Zhou, et al. Research progress of diamond/aluminum composite interface design[J]. Functional Diamond2022, 2(1): 25-39. DOI: 10.1080/26941112.2022.2050953.
Diamond/aluminum composite material has the advantages of high thermal conductivity
low expansion
and lightweight
which has a wide range of application prospects in the field of electronic packaging thermal management. However
the serious interface problems between diamond and aluminum limit the full play of the thermal conductivity of composite materials. A reasonable interface design can maximize the thermal conductivity of composite materials. This article focuses on the interface modification of diamond/aluminum composites
briefly describing the theoretical basis of interface design
the research status of interface modification
interface reaction and composite stability
and prospects for diamond/aluminum composites material development.
Edwards C. Moore’s law: What comes next?. Commun ACM. 2021; 64(2):12–14. Web of Science ®Google Scholar
Grier DA. Forgetting Moore’s law. Computer. 2021; 54(6):46–48. Web of Science ®Google Scholar
Waldrop MM. The chips are down for Moore’s law. Nature. 2016; 530(7589):144–147. PubMedGoogle Scholar
Xingcun T. Advanced materials for thermal management of electronic packaging. Springer New York, 2011. Google Scholar
Zhou HY, Li YQ, Wang HM, et al. Fabrication of functionally graded diamond/Al composites by Liquid-Solid separation technology. Materials. 2021; 14(12):3205. PubMed Web of Science ®Google Scholar
Zhou HY, Ran MR, Li YQ, et al. Effect of diamond particle size on the thermal properties of diamond/Al composites for packaging substrate. Acta Metall Sinica. 2021; 57(7):937–947. Web of Science ®Google Scholar
Zhou HY, Ran MR, Li YQ, et al. Improvement of thermal conductivity of diamond/Al composites by optimization of liquid-solid separation process. J Mater Process Technol. 2021; 297:117267. Web of Science ®Google Scholar
Xie HN, Chen YT, Zhang TB, et al. Adhesion, bonding and mechanical properties of Mo doped diamond/Al (Cu) interfaces: a first principles study [J]. Appl Surf Sci. 2020; 527:146817. Web of Science ®Google Scholar
Hasselman DPH, Johnson LF. Effective thermal conductivity of composites with interfacial thermal barrier resistance. J Compos Mater. 1987; 21(6):508–515. Web of Science ®Google Scholar
T R, M JM, W L. Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast. Scr Mater. 2006; 56(5). Web of Science ®Google Scholar
Molina J-M, Rhême M, Carron J, et al. Thermal conductivity of aluminum matrix composites reinforced with mixtures of diamond and SiC particles. Scr Mater. 2008;58(5):393–396. Web of Science ®Google Scholar
Zhang L. Research on configuration design, preparation and thermal conductivity of diamond aluminum composite. Central South University, 2019. (In Chinese). Google Scholar
Li J, Wang X, Qiao Y, et al. High thermal conductivity through interfacial layer optimization in diamond particles dispersed Zr-alloyed Cu matrix composites. Scr Mater. 2015; 109:72–75. Web of Science ®Google Scholar
Tan Z, Li Z, Xiong D-B, et al. A predictive model for interfacial thermal conductance in surface metallized diamond aluminum matrix composites. Materials & Design. 2014; 55:257–262. Web of Science ®Google Scholar
Yuan M, Tan Z, Fan G, et al. Theoretical modelling for interface design and thermal conductivity prediction in diamond/Cu composites. Diamond Relat Mater. 2018; 81:38–44. Web of Science ®Google Scholar
Fathzadeh M, Fahrvandi H, Nadimi E. Electronic properties of graphene-ZnO interface: a density functional theory investigation. Nanotechnology. 2020; 31(2):025710. PubMed Web of Science ®Google Scholar
Chen L, Chen ST, Hou Y. Understanding the thermal conductivity of diamond/copper composites by first-principles calculations. Carbon. 2019; 148:249–257. Web of Science ®Google Scholar
Zhao ZY, Zhao WJ, Bai PK, et al. The interfacial structure of Al/Al4C3 in graphene/Al composites prepared by selective laser melting: First-principles and experimental. Mater Lett. 2019; 255:126559. Web of Science ®Google Scholar
Zhang H, Huang Y, et al. First-principles study of Al atom diffusion kinetics on Si surface. J Phys. 2019; 68(20):274–282. (In Chinese) Google Scholar
Zhu P, Zhang Q, et al. First-principles calculation and interface reaction of diamond/aluminum composite material interface properties. J Phys. 2021;70(17):263–273. (In Chinese) Google Scholar
Sznajder M. DFT-based modelling of carbon adsorption on the AlN surfaces and influence of point defects on the stability of diamond/AlN interfaces. Diamond Relat Mater. 2020; 103:107694. Web of Science ®Google Scholar
Wang C, Liang SH, Jiang YH. In-situ fabrication and characteristics of an Al4W/Al12W composite using infiltration method. Vacuum. 2019; 160:95–101. Web of Science ®Google Scholar
Wang C, Liang SH, Cui J, et al. First-principles study of the mechanical and thermodynainic propertips of Al4W, Al5W and Al12W under pressure. Vacuum. 2019; 169:108844. Web of Science ®Google Scholar
Song C, Kong XS, Liu CS. First-principles studies on carbon diffusion in tungsten. Chinese Phys B. 2019; 28(11):116106. Web of Science ®Google Scholar
Yi HX, Wang JC, et al. First-principles calculations of the structure, mechanics, electronics, optics and thermodynamic properties of tungsten carbide crystals under high temperature and high pressure. J Phys. 2020; 37(02):239–249. (In Chinese) Google Scholar
Gu KX, Pang MJ, Zhan YZ. Insight into interfacial structure and bonding nature of diamond(001)/Cr3C2(001) interface. J Alloys Compd. 2019; 770:82–89. Web of Science ®Google Scholar
Pang XZ, Yang XY, Yang JB, et al. Investigation on the interface characteristic between ZrC (111) and diamond (111) surfaces by first-principles calculation. Diamond Relat Mater. 2021; 113:108297. Web of Science ®Google Scholar
Wu ZX, Zhan YZ, Xiong L, et al. Properties and electronic structure of Al/Mo2C interfaces: insights from first principle simulation. Philos Mag. 2021; 101(9):1061–1080. Web of Science ®Google Scholar
Chen G, Yang W, Xin L, et al. Mechanical properties of Al matrix composite reinforced with diamond particles with W coatings prepared by the magnetron sputtering method. J Alloys Compd. 2018; 735:777–786. Web of Science ®Google Scholar
Ji G, Tan Z, Lu Y, et al. Heterogeneous interfacial chemical nature and bonds in a W-coated diamond/Al composite. Mater Charact. 2016; 112:129–133. Web of Science ®Google Scholar
Yang W, Chen G, Wang P, et al. Enhanced thermal conductivity in diamond/aluminum composites with tungsten coatings on diamond particles prepared by magnetron sputtering method. J Alloys Compd. 2017; 726:623–631. Web of Science ®Google Scholar
Che Z, Li J, Wang Q, et al. The formation of atomic-level interfacial layer and its effect on thermal conductivity of W-coated diamond particles reinforced Al matrix composites. Compos Part A: Appl Sci Manuf. 2018; 107:164–170. Web of Science ®Google Scholar
Xin L, Tian X, Yang W, et al. Enhanced stability of the diamond/Al composites by W coatings prepared by the magnetron sputtering method. J Alloys Compd. 2018; 763:305–313. Web of Science ®Google Scholar
Zhang C, Cai Z, Wang R, et al. Microstructure and thermal properties of Al/W-coated diamond composites prepared by powder metallurgy. Mater Design. 2016; 95:39–47. Web of Science ®Google Scholar
Che Z, Wang Q, Wang L, et al. Interfacial structure evolution of Ti-coated diamond particle reinforced Al matrix composite produced by gas pressure infiltration. Compos Part B: Eng. 2017; 113:285–290. Web of Science ®Google Scholar
Wu JH, Zhang HL, Zhang Y, et al. The role of Ti coating in enhancing tensile strength of Al/diamond composites. Mater Sci Eng – Struct Mater Prop Microstruct Process. 2013; 565:33–37. Web of Science ®Google Scholar
Liang X, Jia C, Chu K, et al. Thermal conductivity and microstructure of Al/diamond composites with Ti-coated diamond particles consolidated by spark plasma sintering [J]. J Compos Mater. 2012; 46(9):1127–1136. Web of Science ®Google Scholar
Yang B, Yu J-K, Chen C. Microstructure and thermal expansion of Ti coated diamond/Al composites. Trans Nonferrous Metals Soc China. 2009; 19(5):1167–1173. Web of Science ®Google Scholar
Zhang H, Wu J, Zhang Y, et al. Mechanical properties of diamond/Al composites with Ti-coated diamond particles produced by gas-assisted pressure infiltration. Mater Sci Eng A. 2015; 626:362–368. Web of Science ®Google Scholar
Ma S, Zhao N, Shi C, et al. Mo2C coating on diamond: Different effects on thermal conductivity of diamond/Al and diamond/Cu composites. Appl Surf Sci. 2017; 402:372–383. Web of Science ®Google Scholar
Xie H, Chen Y, Zhang T, et al. Adhesion, bonding and mechanical properties of Mo doped diamond/Al (Cu) interfaces: a first principles study. Appl Surf Sci. 2020; 527:146817. Web of Science ®Google Scholar
Sun Y, Zhang C, He L, et al. Enhanced bending strength and thermal conductivity in diamond/Al composites with B4C coating. Sci Rep. 2018; 8(1):11104. PubMedGoogle Scholar
Li N, Wang L, Dai J, et al. Interfacial products and thermal conductivity of diamond/Al composites reinforced with ZrC-coated diamond particles. Diamond Relat Mater. 2019; 100:107565. Web of Science ®Google Scholar
Li X, Yang W, Sang J, et al. Low-temperature synthesizing SiC on diamond surface and its improving effects on thermal conductivity and stability of diamond/Al composites. J Alloys Compd. 2020; 846:156258. Web of Science ®Google Scholar
Guo C, He X, Ren S, et al. Effect of (0–40) wt. % Si addition to Al on the thermal conductivity and thermal expansion of diamond/Al composites by pressure infiltration. J Alloys Compd. 2016; 664:777–783. Web of Science ®Google Scholar
Mizuuchi K, Inoue K, Agari Y, et al. Processing of diamond particle dispersed aluminum matrix composites in continuous solid–liquid co-existent state by SPS and their thermal properties. Compos Part B: Eng. 2011;42(4):825–831. Web of Science ®Google Scholar
Edtmaier C, Segl J, Rosenberg E, et al. Microstructural characterization and quantitative analysis of the interfacial carbides in Al(Si)/diamond composites. J Mater Sci. 2018; 53(22):15514–15529. Web of Science ®Google Scholar
Zhang Y, Li J, Zhao L, et al. Effect of metalloid silicon addition on densification, microstructure and thermal–physical properties of Al/diamond composites consolidated by spark plasma sintering. Mater Design. 2014;63:838–847. Web of Science ®Google Scholar
Zhang H, Wu J, Zhang Y, et al. Effect of metal matrix alloying on mechanical strength of diamond Particle-Reinforced aluminum composites. J Mater Eng Perform. 2015; 24(6):2556–2562. Web of Science ®Google Scholar
Liu XY, Wang WG, Wang D, et al. Effect of nanometer TiC coated diamond on the strength and thermal conductivity of diamond/Al composites. Mater Chem Phys. 2016; 182:256–262. Web of Science ®Google Scholar
Guo C-Y, He X-B, Ren S-B, et al. Thermal properties of diamond/Al composites by pressure infiltration: comparison between methods of coating Ti onto diamond surfaces and adding Si into Al matrix. Rare Met. 2016; 35(3):249–255. Web of Science ®Google Scholar
Monje IE, Louis E, Molina JM. On critical aspects of infiltrated Al/diamond composites for thermal management: Diamond quality versus processing conditions. Compos Part A: Appl Sci Manuf. 2014; 67:70–76. Web of Science ®Google Scholar
Weber L, Tavangar R. Diamond-based metal matrix composites for thermal management made by liquid metal Infiltration-Potential and limits. Linsmeier C, Reinelt M, editor, 1st International Conference on New Materials for Extreme Environments, Stafa-Zurich: Trans Tech Publications Ltd, 2009, pp. 111–115. Google Scholar
Zhang Y, Li J, Zhao L, et al. Optimisation of high thermal conductivity Al/diamond composites produced by gas pressure infiltration by controlling infiltration temperature and pressure. J Mater Sci. 2015; 50(2):688–696. Web of Science ®Google Scholar
Li C, Wang X, Wang L, et al. Interfacial characteristic and thermal conductivity of Al/diamond composites produced by gas pressure infiltration in a nitrogen atmosphere [J]. Mater Design. 2016; 92:643–648. Web of Science ®Google Scholar
Long J, Li X, Fang D, et al. Fabrication of diamond particles reinforced Al-matrix composites by hot-press sintering. Int J Refract Met Hard Mater. 2013; 41:85–89. Web of Science ®Google Scholar
Tan Z, Li Z, Fan G, et al. Fabrication of diamond/aluminum composites by vacuum hot pressing: process optimization and thermal properties. Compos Part B: Eng. 2013; 47:173–180. Web of Science ®Google Scholar
Tan Z, Li Z, Fan G, et al. Diamond/aluminum composites processed by vacuum hot pressing: Microstructure characteristics and thermal properties. Diamond Relat Mater. 2013; 31:1–5. Web of Science ®Google Scholar
Tan Z, Ji G, Addad A, et al. Tailoring interfacial bonding states of highly thermal performance diamond/Al composites: Spark plasma sintering vs. vacuum hot pressing. Compos Part A: Appl Sci Manuf. 2016; 91:9–19. Web of Science ®Google Scholar
Mizuuchi K, Inoue K, Agari Y, et al. Thermal conductivity of diamond particle dispersed aluminum matrix composites fabricated in solid–liquid co-existent state by SPS. Compos Part B: Eng. 2011;42(5):1029–1034. Web of Science ®Google Scholar
Beffort O, Khalid FA, Weber L, et al. Interface formation in infiltrated Al(Si)/diamond composites. Diamond Relat Mater. 2006; 15(9):1250–1260. Web of Science ®Google Scholar
Wu JH, Zhang HL, Zhang Y, et al. Effect of copper content on the thermal conductivity and thermal expansion of Al-Cu/diamond composites. Mater Design. 2012; 39:87–92. Web of Science ®Google Scholar
Wang P, Xiu Z, Jiang L, et al. Enhanced thermal conductivity and flexural properties in squeeze casted diamond/aluminum composites by processing control. Mater Design. 2015; 88:1347–1352. Web of Science ®Google Scholar
Mizuuchi K, Inoue K, Agari Y, et al. Bimodal and monomodal diamond particle effect on the thermal properties of diamond-particle-dispersed Al–matrix composite fabricated by SPS. Microelectron Reliab. 2014;54(11):2463–2470. Web of Science ®Google Scholar
Tan Z, Xiong D-B, Fan G, et al. Enhanced thermal conductivity of diamond/aluminum composites through tuning diamond particle dispersion. J Mater Sci. 2018; 53(9):6602–6612. Web of Science ®Google Scholar
Chen PJ, Zeng YC, et al. Analysis of thermal conductivity of diamond/Al composites prepared by hot-press sintering and pressure infiltration. Funct Mater. 2016;47(10):10184–10188. (In Chinese) Google Scholar
Zhang L, Wei Q, An J, et al. Construction of 3D interconnected diamond networks in Al-matrix composite for high-efficiency thermal management. Chem Eng J. 2020; 380:122551. Web of Science ®Google Scholar
Liu RX, Luo GQ, Li Y, et al. Microstructure and thermal properties of diamond/copper composites with Mo2C in-situ nano-coating. Surf Coatings Technol. 2019; 360:376–381. Web of Science ®Google Scholar
Ye W, Wei Q, Zhang L, et al. Macroporous diamond foam: a novel design of 3D interconnected heat conduction network for thermal management. Mater Design. 2018; 156:32–41. Web of Science ®Google Scholar
An JJ, Wei QP, et al. Effect of surface modification of foamed copper on high quality foamed diamond by chemical vapor deposition. Surf Technol. 2020; 49(3):97–105. (In Chinese) Google Scholar
Maiorano LP, Molina JM. Guiding heat in active thermal management: One-pot incorporation of interfacial nano-engineered aluminium/diamond composites into aluminium foams. Compos Part A. 2020:133(2020):105859. Web of Science ®Google Scholar
Philippe G, E KU, A KF, et al. Site-specific specimen preparation by focused ion beam milling for transmission electron microscopy of metal matrix composites. Microsc Microanal: Off J Microsc Soc Am. Microbeam Anal Soc Microscop Soc Canada. 2004; 10(2):311–316. Google Scholar
Khalid FA, Beffort O, Klotz UE, et al. Microstructure and interfacial characteristics of aluminium-diamond composite materials. Diamond Relat Mater. 2004; 13(3):393–400. Web of Science ®Google Scholar
Monje IE, Louis E, Molina JM. Interfacial nano-engineering in Al/diamond composites for thermal management by in situ diamond surface gas desorption. Scr Mater. 2016;115:159–163. Web of Science ®Google Scholar
Kleiner S, Khalid FA, Ruch PW, et al. Effect of diamond crystallographic orientation on dissolution and carbide formation in contact with liquid aluminium. Scr Mater. 2006; 55(4):291–294. Web of Science ®Google Scholar
Che Z, Zhang Y, Li J, et al. Nucleation and growth mechanisms of interfacial Al4 C3 in Al/diamond composites. J Alloys Compd. 2016; 657:81–89. Web of Science ®Google Scholar
Lu Y, Wang X, Zhang Y, et al. Aluminum carbide hydrolysis induced degradation of thermal conductivity and tensile strength in diamond/aluminum composite. J Compos Mater. 2018; 52(20):2709–2717. Web of Science ®Google Scholar
Lu CJ, Lu Chenjun, Xu J, et al. Performance decline and suppression of diamond/Al (or AlSi alloy) composites. J Compos Mater. 2019; 36(03):669–676. (In Chinese) Google Scholar
0
浏览量
0
Downloads
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621