

FOLLOWUS
1. a Institute for Advanced Materials and Technology University of Science and Technology Beijing
2. b Shunde Graduate School University of Science and Technology Beijing Guangdong PR China
3. d School of Engineering University of Leicester
4. c School of Computer and Communication Engineering University of Science and Technology Beijing
5. e School of Materials Science and Engineering Xiangtan University
6. a Institute for Advanced Materials and Technology University of Science and Technology Beijing Beijing P R China
7. b Shunde Graduate School University of Science and Technology Beijing
Online First:13 March 2024,
Published:2024
Scan QR Code
Sheng Ye, Yuting Zheng, Shangman Zhao, et al. Evolutionary features of subsurface defects of single crystal diamond after dynamic friction polishing[J]. Functional Diamond2024, 4(1).
Sheng Ye, Yuting Zheng, Shangman Zhao, et al. Evolutionary features of subsurface defects of single crystal diamond after dynamic friction polishing[J]. Functional Diamond2024, 4(1). DOI: 10.1080/26941112.2024.2316147.
Due to the fatigue and continuous energy input during high-speed dynamic friction polishing (DFP)
the diamond crystal beneath the polished surface (roughness
<
1 nm) can be distorted/cracked in varying degrees by adjusting the polishing process. In this study
the local amorphization
dislocation extension
and subsurface cleavage with the prolonging of sliding duration were examined in the nanoscale. Different to the localized distortion with sp
2
-π* states in the near-surface area (
<
10 nm) after 15 min DFP
continuous mechanical friction would give rise to the dislocation penetration (to
>
50 nm) and even preferential crystal cleavage with the non-diamond phase (distributing at the position in micrometers range).
Zheng Y, Ye H, Liu J, et al. Surface morphology evolution of a polycrystalline diamond by inductively coupled plasma reactive ion etching (ICP-RIE). Mater Lett. 2019;253:1–5. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Crawford KG, Maini I, Macdonald DA, et al. Surface transfer doping of diamond: a review. Prog Surf Sci. 2021;96(1):100613. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Perez G, MARéCHAL A, Chicot G, et al. Diamond semiconductor performances in power electronics applications. Diamond Relat Mater. 2020;110:108154. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Tsukioka K. Energy distributions and scattering mechanisms of carriers in diamond. Diamond Relat Mater. 2009;18(5-8):792–795. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Wade T, Geis MW, Fedynyshyn TH, et al. Effect of surface roughness and H–termination chemistry on diamond’s semiconducting surface conductance. Diamond Relat Mater. 2017;76:79–85. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Yu X, Li J, Xu H, et al. Influence of diamond matrix morphology on ZnO surface morphology and preferred orientation. Mater Today Commun. 2023;37:107462. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Long C, Yang LI. Influence of surface roughness on surface acoustic waves. Proceedings of the 2020 15th Symposium on Piezoelectrcity, Acoustic Waves and Device Applications (SPAWDA), p. 16–19. 2021. (Open in a new window)Google Scholar
Iriarte GF, RODRíGUEZ JG, Calle F. Synthesis of c-axis oriented AlN thin films on different substrates: a review. Mater Res Bull. 2010;45(9):1039–1045. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Liang J, Masuya S, Kim S, et al. Stability of diamond/Si bonding interface during device fabrication process. Appl Phys Express. 2019;12(1):016501. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Liang J, Masuya S, Kasu M, et al. Realization of direct bonding of single crystal diamond and Si substrates. Appl Phys Lett. 2017;110(11):111603. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Doronin MA, Polyakov SN, Kravchuk KS, et al. Limits of single crystal diamond surface mechanical polishing. Diamond Relat Mater. 2018;87:149–155. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Wen H, Lu J, Xu S, et al. Mechanical chemical polishing of large-size single-crystal diamond substrates with a sol-gel polishing tool. J Manuf Processes. 2022;80:210–219. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Zheng Y, Ye H, Thornton R, et al. Subsurface cleavage of diamond after high-speed three-dimensional dynamic friction polishing. Diamond Relat Mater. 2020;101:107600. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Li Z, Jiang F, Jiang Z, et al. Energy beam-based direct and assisted polishing techniques for diamond: a review. Int J Extreme Manuf. 2024;6(1):012004. (Open in a new window)Google Scholar
Yamamura K, Emori K, Sun R, et al. Damage-free highly efficient polishing of single-crystal diamond wafer by plasma-assisted polishing. CIRP Ann. 2018;67(1):353–356. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Kubota A, Nagae S, Motoyama S. High-precision mechanical polishing method for diamond substrate using micron-sized diamond abrasive grains. Diamond Relat Mater. 2020;101:107644. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Lu J, Xiao P, Tong R, et al. Precision polishing of single crystal diamond (111) substrates using a Sol-Gel (SG) polishing pad. IEEE Trans. Semicond Manufact. 2019;32(3):341–345. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Schuelke T, Grotjohn TA. Diamond polishing. Diam Relat Mater. 2013;32:17–26. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Harris DC. Materials for infrared windows and domes: properties and performance. Bellingham: SPIE Press; 1999. (Open in a new window)Google Scholar
Tatsumi N, Harano K, Ito T, et al. Polishing mechanism and surface damage analysis of type IIa single crystal diamond processed by mechanical and chemical polishing methods. Diamond Relat Mater. 2016;63:80–85. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Haisma J, VAN DER Kruis F J HM, Spierings B A CM, et al. Damage-free tribochemical polishing of diamond at room temperature: a finishing technology. Precis Eng. 1992;14(1):20–27. (Open in a new window)Google Scholar
Liu N, Yamada H, Yoshitaka N, et al. Comparison of surface and subsurface damage of mosaic single-crystal diamond substrate processed by mechanical and plasma-assisted polishing. Diamond Relat Mater. 2021;119:108555. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Volpe P-N, Muret P, Omnes F, et al. Defect analysis and excitons diffusion in undoped homoepitaxial diamond films after polishing and oxygen plasma etching. Diamond Relat Mater. 2009;18(10):1205–1210. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Chen Y, Zhang LC. Polishing of polycrystalline diamond by the technique of dynamic friction, part 4: establishing the polishing map. Int J Mach Tools Manuf. 2009;49(3-4):309–314. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Andrea Carlo F, Robertson J. Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond. Philos Trans A Math Phys Eng Sci. 2004;362(1824):2477–2512. (Open in a new window)PubMed (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Luo H, Ajmal KM, Liu W, et al. Atomic-scale and damage-free polishing of single crystal diamond enhanced by atmospheric pressure inductively coupled plasma. Carbon. 2021;182:175–184. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Yuan S, Guo X, Zhang S, et al. Influence mechanism of defects on the subsurface damage and structural evolution of diamond in CMP process. Appl Surf Sci. 2021;566:150638. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Chen Y, Zhang LC, Arsecularatne JA. Polishing of polycrystalline diamond by the technique of dynamic friction. Part 2: material removal mechanism. Int J Mach Tools Manuf. 2007;47(10):1615–1624. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
Yuan S, Guo X, Mao Q, et al. Effects of pressure and velocity on the interface friction behavior of diamond utilizing ReaxFF simulations. Int J Mech Sci. 2021;191:106096. (Open in a new window)Web of Science ®(Open in a new window)Google Scholar
0
Views
0
Downloads
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621